Enhanced π‐Backdonation from Gold(I): Isolation of Original Carbonyl and Carbene Complexes

The specific electronic properties of bent o‐carborane diphosphine gold(I) fragments were exploited to obtain the first classical carbonyl complex of gold [(DPCb)AuCO]⁺ (ν(CO)=2143 cm^?1) and the diphenylcarbene complex [(DPCb)Au(CPh₂)]⁺, which is stabilized by the gold fragment rather than the carbene substituents. These two complexes were characterized by spectroscopic and crystallographic means. The [(DPCb)Au]⁺ fragment plays a major role in their stability, as substantiated by DFT calculations. The bending induced by the diphosphine ligand substantially enhances π‐backdonation and thereby allows the isolation of carbonyl and carbene complexes featuring significant π‐bond character.     

Synthesis of a C(sp2)-bridged Phosphine-Borane by Ionic Coupling

The vinyl carbenoid H₂C=CBr(Li) has been used as key precursor to prepare a geminal C(sp²)-bridged phosphine-borane. Starting from bromoethene, two sequences of lithiation/electrophilic trapping, with ClPiPr₂ and FBMes₂ respectively, affords iPr₂P–C(=CH₂)–BMes₂ 3 [Mes = 2,4,6-(H₃C)₃C₆H₂]. This new phosphine-borane 3 was characterized by multi-nuclear NMR and mass spectroscopy. It adopts a monomeric open structure without P→B interaction. A few crystals of a secondary product 4 were analyzed by X-ray diffraction, revealing an unusual dimeric structure.     

CW laser-induced photothermal conversion and shape transformation of gold nanodogbones in hydrated chitosan films

We investigate the photothermal conversion and transformation of gold nanoparticles with an initial dogbone shape after dispersion in hydrated chitosan films, which is a representative model of biological tissue, and excitation by a CW diode laser for 1 min. Gold nanodogbones are observed to undergo a distinct modification above a sharp threshold of ~11 W cm⁻² and 110 °C. Surprisingly, the very same modification is achieved up to at least 36 W cm⁻² and 250 °C. We use an analytical model derived from Gans theory to associate the change in color of the films with the change in shape statistics of these gold nanoparticles. This model proves both convenient and dependable. We interpret the photothermal transformation as a rearrangement of particles with a dogbone shape and an aspect ratio of 4.1 into rods with an aspect ratio of 2.5, where material from the end lobes of the dogbones may relocate to the waists of the rods. In turn, additional transitions to stable gold nanospheres may exhibit fairly slower kinetics.     

Parallel or classical kinetic resolution of a planar chiral ferrocenylketone through asymmetric reductions

Racemic 1-acetyl-2-methoxymethylferrocene, (±)-1 was subjected to asymmetric reduction with two different methodologies and complementary results were obtained. When the reduction of (±)-1 was carried out in the presence of CBS-oxazaborolidine catalyst and BH₃·Me₂S as the hydrogen source, both enantiomers of the substrate were converted with comparable reaction rates and selectivities. The corresponding diastereoisomeric ferrocenylalcohols 3a and 3b were obtained in a 1:1 ratio and >90% enantiomeric excess; this reaction profile being related with a parallel kinetic resolution with high ds₁ and ds₂ diastereofacial selectivities. On the contrary, the transfer hydrogenation of (±)-1 with HCOOH/triethylamine in the presence of (R,R)-Noyori’s catalyst proceeded via classical kinetic resolution, so that the formed (?)-3b or unreacted (+)-1 could be obtained in highly enantiopure form before or beyond 50% of the substrate conversion, respectively. Alcohol 3b with an (1R_p,S)- or (1S_p,R)-configuration is not easily accessible by the diastereoselective metallation/electrophilic quenching sequence routinely applied in the synthesis of planar chiral ferrocenes. As a result, the described procedures provide a valuable access to this useful starting material for the synthesis of homochiral related derivatives.     

Structural Effects in Visible‐Light‐Responsive Metal–Organic Frameworks Incorporating ortho‐Fluoroazobenzenes

The ability to control the interplay of materials with low‐energy photons is important as visible light offers several appealing features compared to ultraviolet radiation (less damaging, more selective, predominant in the solar spectrum, possibility to increase the penetration depth). Two different metal–organic frameworks (MOFs) were synthesized from the same linker bearing all‐visible ortho‐fluoroazobenzene photoswitches as pendant groups. The MOFs exhibit different architectures that strongly influence the ability of the azobenzenes to isomerize inside the voids. The framework built with Al‐based nodes has congested 1D channels that preclude efficient isomerization. As a result, local light–heat conversion can be used to alter the CO₂ adsorption capacity of the material on exposure to green light. The second framework, built with Zr nodes, provides enough room for the photoswitches to isomerize, which leads to a unique bistable photochromic MOF that readily responds to blue and green light. The superiority of green over UV irradiation was additionally demonstrated by reflectance spectroscopy and analysis of digested samples. This material offers promising perspectives for liquid‐phase applications such as light‐controlled catalysis and adsorptive separation.     

Carbon composite electrodes: surface and electrochemical properties

Electrodes based on particulate carbon-epoxy or silicone composites have been formed and characterised using electrochemical methods, scanning electron microscopy and scanning electrochemical microscopy. These composites are rigid, exhibit high electrical conductivity and are stable in organic solvents for prolonged periods. The bulk resistance of the Araldite-M and Araldite-CW2215 based electrodes is low, 130+/-12 and 185+/-15 ohms, respectively. In contrast, the bulk resistance of the silicone based electrodes is 1480+/-112 ohms. The uncompensated resistance of electrochemical cells where the composites act as working electrodes is significantly larger than that expected on the basis of solution resistance alone, i.e., up to 7.5 kohms in the case of the silicone composites. These results are interpreted in terms of the presence of pores within the composite material. The response times of the composite electrodes to changes in the applied potential is between 3.1 and 7.2 ms which, although almost an order of magnitude longer than a comparable glassy carbon electrode, is sufficiently rapid to give useful voltammetric data for scan rates of several V s(-1). Close to ideal reversible cyclic voltammetry is observed for ferrocene under semi-infinite diffusion control for scan rates between 0.01 and 0.1 V s(-1) at the Araldite composites. In contrast, the large resistance associated with the silicone based materials causes quasi-reversible responses to be observed over this range of scan rate. Scan rate dependent cyclic voltammetry and time resolved chronoamperometry responses observed for ferrocene in solution are consistent with those expected for a random array of microelectrodes. Scanning electron microscopy and scanning electrochemical microscopy has been used to image the shape, size and electrochemical activity of the electroactive zones. In the case of Araldite-M, the quality of the electrode surface has been probed by comparing the rate of heterogeneous electron transfer at a composite microelectrode with that found for a carbon fibre electrode. The standard heterogeneous electron transfer rate constant, k degrees , is 6.0+/-0.1 x 10(-3) cm s(-1) for the composite compared to 1.5+/-0.1 x 10(-1) cm s(-1) for the carbon fibre electrode. While the smaller rate constant found for the composite suggests a less pristine surface, k degrees is sufficiently large to support reversible, electron transfer under typical electroanalytical conditions. These fundamental measurements will underpin the development of enzyme based biosensors for use in organic solvents.     

Radical reaction of sodium hypophosphite with terminal alkynes: synthesis of 1,1-bis-H-phosphinates

[reaction: see text] The room-temperature radical addition of sodium hypophosphite to terminal alkynes produces the previously unknown 1-alkyl-1,1-bis-H-phosphinates in moderate yield. The reaction is initiated by R3B and air and proceeds under mild conditions in an open container. The bissodium salts precipitate spontaneously from the reaction mixtures, thus providing a simple purification procedure and the opportunity for multigram synthesis. The 1,1-bis-H-phosphinate products are novel precursors of the biologically important 1,1-bisphosphonates.     

Network synthesis under survivability constraints

Telecommunication networks are subject to link and equipment failures. Since failures cannot be entirely avoided, networks have to be designed so as to survive failure situations. In this paper, we are interested in designing low cost survivable networks. Given point-to-point traffic demands and a cost/capacity function for each link, we aim at finding the minimum cost capacities satisfying the given demands and survivability requirements. A survivability model that reroutes interrupted traffic using all the available capacities on the network is presented and studied. In the proposed model, capacity and flow assignments for each network operating state are jointly optimized. We prove the -hardness of the optimisation problem defined by dual constraints. Then, we propose a polynomial relaxation along with a fast heuristic to compute a feasible solution of the problem from its relaxed optimal solution. Our solution approaches are tested on a set of problem instances.Received: September 2002, Revised: July 2003, AMS classification: 90C05